Price | Negotiation |
MOQ | Negotiation |
Delivery Time | 30 workdays |
Place of Origin | Henan,China |
Certification | CE ISO GOST |
Packaging Details | Export standard packaging |
Payment Terms | L/C, T/T |
Supply Ability | 10000 sets per year |
Condition | New | Hydraulic System Working Pressure | 260bar |
Place of Origin | Henan,China | Packaging Details | Export standard packaging |
Loading capacity | 45 Tons | Maximum Descent Speed (No Load/Full Load) | 360/300mm/s |
Supply Ability | 10000 sets per year | Certification | CE ISO GOST |
Payment Terms | L/C, T/T | Maximum Lifting Speed (No Load/Full Load) | 420/250mm/s |
Type | Telescopic Handler | Price | Negotiation |
Delivery Time | 30 workdays | Product name | container reach stacker |
Minimum Order Quantity | Negotiation | Gradeability (No Load/Full Load) | 39/32% |
Heavy Duty 45 Tons Container Transport Reach Stacker , Container Lifting Equipment
Reach Stacker Introduction:
The container reach crane, referred to as the reach crane, is commonly known as the container reach stacker or the reach stacker. The container reach crane is a kind of crane used to load and unload containers, which belongs to a kind of lifting equipment, and can also be said to be a mobile machine. Container reach cranes are specially designed for 20-foot and 40-foot international containers, and are mainly used for container stacking and horizontal transportation in terminals and stackyards. It has the advantages of low pressure, high stacking layers, and high utilization rate of the stacking plant. Cross-box operation is possible. It is especially used for container loading and unloading in small and medium ports, railway stations and highway stations, and can also be used as auxiliary equipment in large container terminals.
Reach Stacker Performance parameters:
Basic Configuration | Engine Model | VOLVO TAD1151 | Engine Rated Power/Speed | 265/2100kW/rpm |
Engine Maximum Torque | 1780/1260N·m/rpm | Exhaust Emission Standard | Ⅲ阶段 | |
Transmission Model | DANA 15.5HR36000 | Drive Axle Model | Kessler D102PL341 | |
Tire | 18.00-25 40PR | |||
Spreader | Model Number | SDJ450FA | Sideshift Distance | ±800mm |
Rotation Angle | +105/-195° | Tilt Angle | 0° | |
Dead Weight | 7.8t | |||
Boom | Maximum Lift Height | 15100mm | Inclination | 0~60° |
Machine Parameters | Whole Vehicle Quality | 72t | Overall Length | 11340mm |
Overall Width | 6053-12185mm | Overall Height | 4770mm | |
Wheelbase | 6000mm | Minimum Ground Clearance | 350mm | |
Front Wheelbase | 3033mm | Rear Wheelbase | 2790mm | |
Performance Parameters | Rated Load | 45t | Maximum Lifting Speed (No Load/Full Load) | 420/250mm/s |
Maximum Descent Speed (No Load/Full Load) | 360/300mm/s | Maximum Form Speed (No Load/Full Load) | 25/21km/h | |
Gradeability (No Load/Full Load) | 39/32% | Hydraulic System Working Pressure | 260bar | |
40' Container Aisle Width A2 | 13600mm | 40' Container Aisle Width A2 | 11300mm |
Reach Stacker effect:
The container reach crane has a retractable and left-right rotating container spreader, which can be used for 20-foot and 40-foot container loading and unloading operations. When hoisting a container, the reach stacker does not have to be perpendicular to the container, but can operate at an angle with the container. After lifting, the spreader can be rotated to pass through narrow passages. At the same time, the spreader can be moved 800mm left and right to facilitate the box alignment during hoisting and improve work efficiency. For freight stations with poor site conditions, the reach crane can also work normally.
The
telescopic
boom
can
be
loaded
and
luffed.
The
take-off
and
landing
of
the
container
is
completed
by
the
boom
telescopic
and
luffing.
When
the
boom
is
extended
and
the
pitching
cylinder
is
extended,
the
lifting
speed
is
faster,
and
it
is
locked
at
the
same
time
when
falling.
Enter,
you
can
get
a
faster
descent
speed.
During
operation,
the
whole
vehicle
can
be
moved,
luffed,
and
boom
telescopic
at
the
same
time,
with
high
work
efficiency.
Reach Stacker Photos: